Are you looking for commercial garage doors to keep your place of business safe? Our rolling doors and fire shutters will protect your place of business from fires and keep it safe. Learn more about the Model FDC and FDCL.

MODEL FDC

In-line Gear Drive Fire Door Motor Operator

For fire shutter doors up to 350 square foot in standard cycle applications:

PDF – Model FDC Series Brochure

model_fdc_imageNOTE: CONSULT FACTORY for availability on doors less than 10 feet wide or less than 100 square foot.

  • High-efficiency in-line gear reducer
  • Horizontal front of coil or wall mount
  • Provides automatic closing without a loss of spring tension – eliminates the need for traditional mechanical reset
  • Electronic thermal sensor, detector or alarm activation of motor controlled closing or internal release and brake controlled closing
  • Provision for optional remote fusible link release connection
  • 72 hour battery backup with automatic closing prior to complete discharge of batteries
  • Close on alarm feature to close door though motor operator upon activation by a thermal sensor, detector or alarm will activate warning devices (if provided), and close door after a selectable time delay. If an obstruction is encountered, it will cycle upon contact with and/or stop on the obstruction, internally release and continue closed when the obstruction is removed with the closing speed controlled through the brake (requires a door be provided with a sensing edge)
  • Automatic closing upon power loss prior to the battery discharge – will activate warning devices (if provided), internally release and close the door after a selectable time delay with closing speed controlled by the brake. If an obstruction is encountered, the door will stop on the obstruction and continue to close after it is removed (requires the door be provided with a sensing edge)
  • Failsafe closing in the event of a system failure – will internally release and close the door with controlled descent
  • Auto-reset to restore the normal operation of the rolling door by activating open control after alarm is cleared/power is restored
  • 1/2 and 1 hp
  • 115V, 230V – 1ph / 208-230V, 460V – 3ph

NOTE: FDC fire shutter door motor operators do not have an auxiliary chain hoist or auxiliary release


MODEL FDCL

In-line Gear Drive Fire Door Motor Operator

For fire shutter doors up to 150 square foot in standard cycle applications:

PDF – Model FDCL Series Brochure

model_fdcl_imageNOTE: CONSULT FACTORY for availability on doors less than 4 feet wide or less than 20 square foot.

  • High-efficiency in-line gear reducer
  • Horizontal front of coil or wall mount
  • Provides automatic closing without a loss of spring tension – eliminates the need for the traditional mechanical reset
  • Electronic thermal sensor, detector or an alarm activation of motor controlled closing or internal release and brake controlled closing
  • Provision for the optional remote fusible link release connection
  • 2 hour battery backup with an automatic closing prior to the complete discharge of batteries
  • Close on the alarm feature to close the door though the motor operator upon activation by the thermal sensor, detector, or alarm will activate warning devices (if provided), and close the door after a selectable time delay. If an obstruction is encountered, it will cycle upon the contact with and/or stop on the obstruction, internally release and continue closed when the obstruction is removed with the closing speed controlled through the brake (requires door be provided with a sensing edge)
  • Automatic closing upon power loss prior to battery discharge – will activate the warning devices (if provided), internally release and close a door after a selectable time delay with the closing speed controlled by the brake. If an obstruction is encountered, the door will stop on the obstruction and continue to close after it is removed (requires door be provided with a sensing edge)
  • Failsafe closing in the event of system failure – will internally release and close door with controlled descent
  • Auto-reset to restore normal operation of the rolling door by activating open control after alarm is cleared/power is restored 1/2 hp – 115V, 230V – 1ph / 208 -230V, 460V – 3ph

NOTE: FDCL fire door motor operators do not have an auxiliary chain hoist or auxiliary release